Kyocera KM-4230 Service Manual page 242

Maintenance
item No.
U093 Setting the exposure density gradient
Description
Changes the exposure density gradient in manual density mode,
depending on respective image modes (text, text and photo, photo).
Purpose
To set how the image density is altered by a change of one step in the
manual density adjustment. Also used to make copy image darker or
lighter.
Start
1 Press the print key. The screen for selecting an item is displayed.
2 Select the image mode to be adjusted. The screen for the selected item
is displayed.
Display
TEXT
MIXED
PHOTO
Setting
1 Select the item to be adjusted. The selected item is displayed in
reverse and the current setting is displayed in the adjustment window.
2 Adjust the setting using the Up/Down keys.
Display
DARKER
LIGHTER
Increasing the setting makes the change in density larger, and
decreasing it makes the change smaller.
Image density
Dark
Set to LIGHTER
Light
Light
Description
Density in text mode
Density in text and photo mode
Density in photo mode
Description
Change in density
when manual density is set dark
Change in density
when manual density is set light
Center
Density adjustment range: Normal
Density adjustment range: Special area
Figure 3-2-5 Exposure density gradient
Description
Setting range
0 to 3
0 to 3
Setting: 3 Setting: 0
Set to DARKER
Dark
2A3/4
Initial setting
0
0
Density adjustment
3-2-33