Kyocera KM-4230 Service Manual page 221

Hide thumbs Also See for KM-4230:

Table of Contents

Copying without paper

Simulates the copy operation without paper feed.

To check the overall operation of the machine.

1 Press the print key. The screen for selecting an item is displayed.

2 Select the item to be operated. The selected item is displayed in

3 Press the interrupt key. The copy mode screen is displayed.

4 Set the operation conditions required on the copy mode screen.

Changes in the following settings can be made.

• Paper feed locations

• Magnifications

• Simplex or duplex copy modes

• Number of copies: in simplex copy mode, continuous copying is

performed when set to 999; in duplex copy mode, continuous copying

is performed regardless of the setting.

• Copy density

• Keys on the operation panel other than the energy saver key

5 To control the paper feed pulley, remove all the paper in the drawers,

or the drawers. With the paper present, the paper feed pulley does not

6 Press the print key. The operation starts.

Copy operation is simulated without paper under the set conditions.

When operation is complete, the screen for selecting an item is

7 To stop continuous operation, press the stop/clear key.

Press the stop/clear key at the screen for selecting an item. The screen for

selecting a maintenance item No. is displayed.

Only the copier operates.

Both the copier and SRDF operate

(continuous operation).

Chapters

Table of Contents