Kyocera KM-4230 Service Manual page 336

17. Loosen the two screws securing the mirror 2 frame.
18. Insert the mirror 1 lower frame into the scanner unit and seat it on the positioning
holes.
19. Insert the two frame securing tools into the positioning holes in the front and rear of
the scanner unit and determine the positions of the mirror 1 lower frame and mirror
2 frame.
20. While holding the scanner wire on the mirror 1 lower frame, secure the wire
retainers at the front and rear of the mirror 1 lower frame using the two screws for
each.
Wire retainer
Mirror 1 lower frame
Mirror 2 frame
21. Retighten the two screws securing the mirror 2 frame.
22. Remove the two screws holding each of the two frame securing tools and then the
tools.
23. Refit all removed parts.
Screws
Frame securing tool
Figure 3-3-33 Securing the scanner wire
Frame securing tool
Screws
2A3/4
Mirror 2 frame
Wire retainer
Mirror 1 lower frame
3-3-27