Unpacking And Installation - Kyocera KM-4230 Service Manual

3-1-1 Unpacking and installation

( 1 ) Installation environment
1. Temperature: 10 - 35°C/50 - 95°F
2. Humidity: 15 - 18%RH
3. Power supply: 120 V AC, 10 A
4. Power source frequency: 50 Hz ±0.3%/60 Hz ±0.3%
5. Installation location
• Avoid direct sunlight or bright lighting. Ensure that the photoconductor will not be
exposed to direct sunlight or other strong light when removing paper jams.
• Avoid extremes of temperature and humidity, abrupt ambient temperature
changes, and hot or cold air directed onto the machine.
• Avoid dust and vibration.
• Choose a surface capable of supporting the weight of the machine.
• Place the machine on a level surface (maximum allowance inclination: 1° ).
• Avoid air-borne substances that may adversely affect the machine or degrade the
photoconductor, such as mercury, acidic or alkaline vapors, inorganic gasses,
NOx, SOx gases and chlorine-based organic solvents.
• Select a room with good ventilation.
6. Allow sufficient access for proper operation and maintenance of the machine.
Machine front: 1000 mm/39
Machine right: 700 mm/27
15
a: 811 mm/31 /
16
1
b: 1131 mm/44 / "
2
11
c: 627 mm/24 /
16
220 - 240 V AC, 4.8 A
3
/ "
8
5
/ "
8
h
b
Figure 3-1-1 Installation dimensions
" d: 1279 mm/50
e: 748 mm/29
" f: 1506 mm/59
Machine rear: 100 mm/4"
Machine left: 600 mm/23
i
d
c
a
3
/ "
8
7
/ "
16
5
/ "
16
5
/ "
8
g
e
f
15
g: 455 mm/17 /
16
15
h: 1827 mm/71 /
16
3
i: 35 mm/1 / "
8
2A3/4
"
"
3-1-1