Kyocera KM-4230 Service Manual page 366

3. Remove the transfer charger front and rear lids.
4. Remove the separation guide.
5. Replace the transfer charger cleaning pad and separation charger cleaning pad.
6. Remove the charger wire retainer pins, charger springs and then the charger wires.
Charger springs
Transfer charger
cleaning pad
Separation charger
cleaning pad
Transfer charger rear lid
Charger wires
Figure 3-3-67 Detaching the charger wires
Separation guide
Charger wire
retainer pins
2A3/4
Transfer charger
front lid
3-3-57