Kyocera KM-4230 Service Manual page 382

Hide thumbs Also See for KM-4230:

Table of Contents

( 5 ) Replacing the heat roller

Replace the heat roller as follows.

1. Remove fixing heaters M and S (see page 3-3-64).

2. Open the fixing unit stay (see page 3-3-71).

3. Loosen the screw holding each of the fixing unit front and rear frames and move the

heat roller stopper in the direction of the arrow.

4. Remove the heat roller.

Heat roller stopper

Fixing unit rear frame

Figure 3-3-86 Detaching the heat roller

Fixing unit front frame

Heat roller stopper

Chapters

Table of Contents