Unpacking And Installation; Installation Procedure - Kyocera KM-2530 Service Manual

2DF

1-3-1 Unpacking and installation

(1) Installation procedure

Start
Unpack.
Remove the tapes and pad.
Install the optional paper feed desk or
large paper deck. Carry out initial developer setting
(maintenance item U130).
Remove the pins holding light source units 1 and 2.
Load paper.
Install the original cover or the DF.
Output an own-status report
(maintenance item U000).
Install other optional devices.
Exit maintenance mode.
Install the toner container.
Print out the user setting list.
Install the toner disposal tank.
Make test copies.
Connect the power cord.
Attach the function seat.
Completion of the machine installation.
1-3-1