Top-Side Components; Transmission; Speed Governor - Arctic Cat 700 Diesel ATV 2007 Service Manual

9. Remove five cap screws securing the transmission
to the V-belt housing; then remove four cap screws
securing the engine-to-transmission mounting plate.
10. Pull the front propeller shaft forward until it is free
of the front transmission output yoke; then remove
the transmission from the left side.
Back
DE085A
DE090A
DE589A
DE487
Back to TOC

Top-Side Components

NOTE: For efficiency, it is preferable to remove
and disassemble only those components which
need to be addressed and to service only those
components. The technician should use discretion
and sound judgment.
AT THIS POINT
To service any one specific component, only limited
disassembly of components may be necessary. Note
the AT THIS POINT information in each sub-section.
NOTE: The engine/transmission does not have
to be removed from the frame for this procedure.

SPEED GOVERNOR

Removing/Disassembling
1. Remove the timing belt (see Left-Side Compo-
nents in this section).
2. Remove the air filter assembly; then remove the
valve cover.
3. Disconnect the throttle cable; then remove the cap
screws securing the intake manifold/throttle cable
housing to the cylinder head.
Back to Section TOC
3
DE074
DE080A
Next
3-7