Arctic Cat 700 Diesel ATV 2007 Service Manual page 133

2. Using a T-40 torx wrench, remove the cap screws
securing the gear case cover. Account for and
make note of the ID tag location for assembling
purposes.
3. Using a plastic mallet, tap lightly to remove the
differential cover. Account for an O-ring.
NOTE: If the cover is difficult to remove, pry on
the cover in more than one recessed location.
4. Remove the splined coupler, shifter fork, pin, and
spring of the differential lock assembly and set
aside. Note position of parts for assembling pur-
poses.
Back
KX209
KX173
KX174
Back to TOC
5. Make match marks on the left bearing housing and
differential housing; then remove the plate and
account for a shim. Mark the shim as left-side.
6. Place the differential with the open side down;
then lift the housing off the spider assembly.
Account for shim(s) and mark as right-side.
Back to Section TOC
KX175
KX176
6
KX177
KX178
Next
6-9