Arctic Cat 700 Diesel ATV 2007 Service Manual page 82

9. Mark the pistons, connecting rods, and connecting
rod caps for installing purposes; then rotate the
crankshaft so that one connecting rod is at bot-
tom-dead-center (BDC).
10. Remove the two cap screws from the connecting
rod cap and remove the cap. Account for one bear-
ing insert.
Back
DE390A
DE580
DE440A
Back to TOC
11. Rotate the crankshaft carefully until the second
connecting rod is at BDC; then using a large
wooden dowel or hammer handle, carefully push
against the first connecting rod until the pis-
ton/connecting rod assembly is free of the cylinder
bore.
12. Attach the connecting rod cap with bearing inserts
and loosely install the cap screws keeping the
assemblies together.
Back to Section TOC
DE600
3
DE599A
DE394
Next
3-59