Arctic Cat 700 Diesel ATV 2007 Service Manual page 170

5. Remove the cap screws and nylon ties securing the
left-side and right-side splash panels; then remove
the panels.
6. Remove one shoulder screw and four plastic rivets
on each side to separate the front panel lower fend-
ers from the left-side and right-side footwells.
Back
8-12
CD684A
CD685
CD691
CD682
Back to TOC
7. Remove the shift knob retaining pin and remove
the shift knob; then remove the shift lever pivot
axle nut and remove the axle and shift lever.
Account for a spring and two O-rings.
8. Disconnect four headlight connectors and secure
the wires out of the way; then disconnect the wires
to the front accessory plug.
9. Rotate the handlebar to the full-left position; then
lift and slide the panel to the rear and lift the rear
up to clear the handlebar.
Back to Section TOC
CD779
CD780A
CD681
Next