16. Remove the key (3); then remove the starter drive
gear (4).
17. Remove the Allen-head cap screws securing the neu-
tral switch housing (1); then remove the switch.
Account for one O-ring (2) two switch contacts (3
and 4), and two springs behind the switch contacts.
NOTE: To aid in installing, it is recommended that
the assemblies be kept together and IN ORDER.
10
Top-Side Components
NOTE: For efficiency, it is preferable to remove
and disassemble only those components which
need to be addressed and to service only those
components. The technician should use discretion
and sound judgment.
AT THIS POINT
To service any one specific component, only
SP173
limited disassembly of components may be
necessary. Note the AT THIS POINT information in
each sub-section.
NOTE: The engine/transmission does not have to
be removed from the frame for this procedure.
Removing Top-Side
Components
A. Valve Cover
B. Cylinder Head
C. Cylinder
SP174
NOTE: Remove the spark plug, timing inspection
plug (1), and the alternator cover cap (2); then
using a socket wrench, rotate the camshaft to top-
dead-center of the compression stroke.
SP175A
SP177
SP178