Arctic Cat 700 Diesel ATV 2007 Service Manual page 140

3. Pour 275 ml (9.3 fl oz) of SAE 80W-90 hypoid
lubricant into the differential and install the filler
plug. Tighten to specifications.
4. Install the front drive actuator with the three
torx-head cap screws; then connect the wire con-
nector to the main wiring harness.
5. Install the inner fender panels.
6. Install the front axles (see Drive Axles in this sec-
tion).
7. Secure the upper A-arms with cap screws and lock
nuts. Tighten to specifications.
8. Secure the lower shock eyelets with cap screws
and lock nuts. Tighten to specifications.
Back
6-16
CD859
AG925
AF610D
Back to TOC
9. Secure the tie rods ends with the lock nuts. Tighten
to specifications; then install and spread the cotter
pins.
10. Making sure that each caliper has the 0.76 mm
(0.030 in.) spacer washers between the caliper and
the knuckle, install the brake calipers. Secure with
the cap screws tightened to specifications.
Back to Section TOC
AF897D
AF896D
AF895D
Next