Arctic Cat 700 Diesel ATV 2007 Service Manual page 38

11. Using an appropriate holding tool, remove the cap
screw securing the camshaft drive pulley to the
camshaft; then remove the pulley.
12. Remove the camshaft support housing; then
remove the speed governor flyweight assembly.
Account for an O-ring.
Back
DE260C
DE529
DE276
DE245A
Back to TOC
13. Remove the governor control spool, thrust bear-
ing, and thrust washer keeping all components in
order of disassembly.
14. Remove the camshaft end cover; then gently slide
the camshaft toward the flywheel end of the
engine. Rotate the camshaft slightly to prevent
binding and hanging in the camshaft bores.
Account for the fuel pump eccentric bushing.
Back to Section TOC
DE246A
3
DE278A
DE297A
Next
3-15