Arctic Cat 700 Diesel ATV 2007 Service Manual page 98

9. If removed, install the fuel filter bracket onto the
frame and tighten the mounting hardware securely.
10. Install the exhaust pipe and gasket and secure with
two copper nuts. Do not tighten the nuts at this
time.
11. Install the muffler and secure to the exhaust pipe
with two springs making sure the grafoil seal is in
place; then tighten the exhaust pipe nuts to specifi-
cations.
Back
DE080A
DE032
DE587
Back to TOC
12. Connect the wiring connectors to the temperature
sensor, oil pressure sensor, gear shift position
switch connector, and voltage regulator; then con-
nect the starter solenoid, glow plug power wire,
and alternator positive wire.
Back to Section TOC
DE586
3
DE104A
DE067A
DE077A
Next
3-75