3. Remove the snap ring; then remove the input shaft
from the pinion housing.
4. Using a seal removal tool, remove the input shaft
seal. Account for a spacer.
Back
CD103
CD106
CD107
AF982
Back to TOC
5. Remove the snap ring securing the input shaft
bearing; then place the pinion housing in a press
and remove the bearing.
Assembling Input Shaft
1. Place the pinion housing in a press and install the
input shaft bearing. Secure the bearing with the
existing snap ring making sure the sharp edge of
the snap ring faces to the outside.
Back to Section TOC
AF983
AF984
6
KX219
Next
6-7