Arctic Cat 700 Diesel ATV 2007 Service Manual page 41

13. Assemble the rocker arm assembly installing the
rocker arms and supports in the original positions
as removed coating all components with clean
engine oil. Hold components in place with rubber
bands.
Installing
NOTE: The flywheel end of the camshaft includes
a bolt-on eccentric to drive the lift pump. If the
eccentric has been removed, install and tighten
the cap screw to specifications.
1. Coat the camshaft journals, lobes, and camshaft
bores in the cylinder head with clean engine oil;
then carefully insert the camshaft into the cylinder
head being careful not to nick or jam journals or
journal bores.
2. Install the lift pump eccentric bushing onto the
camshaft; then install the camshaft end cover
using a new O-ring. Tighten the cap screws
securely.
Back
3-18
DE529
DE525
Back to TOC
3. Insert the lift pump push rod and engage the
eccentric bushing; then using a new sealing ring,
install the lift pump and tighten the mounting nuts
securely.
Back to Section TOC
DE540A
DE297A
DE540B
DE530
Next