Front Body Panel/Side Panels - Arctic Cat 700 Diesel ATV 2007 Service Manual

5. Install eight cap screws and lock nuts securing the
right-side footwell to the front and rear fenders;
then place the left-side foot peg into position and
secure with two cap screws and lock nuts. Tighten
securely.
6. Install the steering post cover. Secure with the
reinstallable rivets.
7. Place the shift lever into position making sure the
spring is installed; then secure with the axle pivot
bolt and lock nut.
8. Install the shift knob and the left-side and
right-side splash panels; then reconnect the head-
lights. Tighten all fasteners securely.
9. Connect the negative battery cable. Tighten the
battery terminal cap screw securely.
10. Install the tool tray; then install the seat. Make
sure the seat locks securely.
Front Body Panel/
Side Panels
REMOVING
1. Remove the reinstallable rivets securing the radia-
tor access cover and remove the cover; then
remove the reinstallable rivets securing the steer-
ing post cover and remove the cover.
Back
CF134A
CD666
Back to TOC
2. Remove the seat.
3. Remove four machine screws and lock nuts secur-
ing the front rack to the frame; then remove the
front rack. Account for four grommets and four
bushings.
4. Remove three reinstallable rivets securing the
right side panel; then remove the cap screws secur-
ing the rear of the front panel to the frame.
Back to Section TOC
CD667
CD679A
8
CD680
Next
8-11