Arctic Cat 700 Diesel ATV 2007 Service Manual page 27

10. Remove the V-belt cooling fan assembly; then dis-
connect the V-belt inlet and outlet cooling boots
from the V-belt housing.
11. Remove the fuel inlet and lift pump output hoses
from the lift pump. Discard four crush washers.
12. Remove the fuel supply and fuel return hoses from
the fuel rail.
Back
3-4
DE074A
DE076A
DE078A
Back to TOC
! CAUTION
The fuel rail connections are easily bent. Use care
when removing the hose clamps and hoses.
13. Disconnect the wire connectors from the tempera-
ture sensor, oil pressure sensor, gear shift position
switch connector, and voltage regulator; then dis-
connect the starter solenoid, glow plug power
wire, and the alternator positive wire.
Back to Section TOC
DE065A
DE104A
DE067A
Next