27. Remove the low gear. Account for a washer and
the low gear bearing and bushing.
Inspecting
1. Inspect all shafts for excessive wear, worn splines,
bearing surface discoloration, or chipped gears.
Back
3-50
DE184
DE155
DE158A
Back to TOC
2. Inspect all shift dogs for chips, rounded dogs,
worn splines, or discoloration.
3. Inspect all idler gears, bushings, thrust washers,
and shafts for abnormal wear, discoloration, chip-
ping, or galling.
Back to Section TOC
DE140A
DE162
DE177
DE143
Next