Arctic Cat 700 Diesel ATV 2007 Service Manual page 99

13. Connect the fuel supply and return hoses and
secure with the hose clamps.
14. Using new crush washers, connect the fuel inlet
and lift pump outlet banjo-fitting bolts to the lift
pump and tighten the banjo-fitting bolts securely.
15. Install the V-belt cooling fan assembly; then install
the V-belt cooling boots to the V-belt housing.
Back
3-76
DE494A
DE065A
DE078B
Back to TOC
16. Connect the V-belt cooling fan connector.
17. Install the air filter assembly and secure with four
cap screws; then connect all hoses and secure with
hose clamps. Tighten all hardware securely.
18. Install the coolant filler neck on the thermostat
housing and tighten the hose clamp securely; then
install the upper radiator hose. Tighten all hose
clamps securely.
Back to Section TOC
DE076A
DE518A
DE074A
Next