Arctic Cat 700 Diesel ATV 2007 Service Manual page 62

B. Rotate the camshaft to align the reference
marks (A and B); then rotate the crankshaft to
align reference marks (C and D).
2. Install the timing belt keeping tension on the belt
between the drive pulley and the camshaft pulley.
Make sure the arrows are orientated in the direc-
tion of engine rotation.
Back
DE275B
DE272A
DE270A
Back to TOC
3. Install the timing belt preload tool on the timing
belt tensioner tab; then using a suitable torque
wrench, position the handle 90° to the tensioner
tab and apply 2.0 kg-m (14.5 ft-lb) of torque.
Tighten the timing belt idler nut securely.
4. Rotate the engine in the direction of rotation
(clockwise facing the timing belt) three full revo-
lutions; then loosen the idler nut and repeat step 3.
5. After repeating step 4 two times, tighten the tim-
ing belt idler nut to specifications.
6. Install the timing belt cover and secure with the
existing hardware; then install the crankshaft pul-
ley making sure the alignment pin is correctly
located.
Back to Section TOC
DE225
3
DE234A
DE222A
Next
3-39