VessRAID 1000f, 1000i, 1000s Series Product Manual
Configuring a Management Path
VessRAID controller has one (1) Ethernet RJ-45 Management Port connector.
See page 26, Figure 12.
To establish the management path:
1.
Attach one end of an Ethernet cable to the standard NIC in the Host PC.
Attach the other end of the Ethernet cable to one of the ports on the standard
network switch. See page 29, Figure 14.
2.
Attach one end of an Ethernet cable to one of the ports on the standard
network switch.
Attach the other end of the Ethernet cable to the Management Port on the
VessRAID subsystem. See page 29, Figure 14.
If you have multiple VessRAID subsystems, Host PCs or Servers, repeat
steps 1 and 2 as required.
28