Working With Lun Mapping; Viewing A List Of Initiators; Enabling Lun Mapping; Creating An Initiator - Promise Technology 1000f series Product Manual
Fc, iscsi, sas external disk array subsystems
Hide thumbs
Also See for 1000f series:
- Product manual (28 pages) ,
- Product manual (438 pages) ,
- Quick start manual (472 pages)
Table of Contents
Advertisement
VessRAID 1000f, 1000i, 1000s Product Manual
Working with LUN Mapping
LUN Mapping includes the following functions:
•
Viewing a List of Initiators (page 268)
•
Enabling LUN Mapping (page 268)
•
Creating an Initiator (page 268)
•
Mapping a LUN to an Initiator (page 269)
•
Deleting an Initiator (page 269)
Viewing a List of Initiators
LUN Mapping must be enabled in order for VessRAID to recognize an iSCSI
initiator.
To view a list of initiators:
1.
From the Main Menu, highlight Additional Info and Management and press
Enter.
2.
Highlight LUN Mapping and press Enter.
A list of the current initiators appears.
Enabling LUN Mapping
To enable LUN mapping:
1.
From the Main Menu, highlight Additional Info and Management and press
Enter.
2.
Highlight LUN Mapping and press Enter.
A list of the current iSCSI initiators appears.
LUN Mapping must be enabled in order for VessRAID to recognize the initiator. If
LUN Mapping is currently disabled, highlight Enable LUN Mapping and press
Enter.
Creating an Initiator
You must add an initiator to the VessRAID's initiator list in order to use the
initiator to create a LUN.
To create (add) a new initiator:
1.
From the Main Menu, highlight Additional Info and Management and press
Enter.
2.
Highlight LUN Mapping and press Enter.
3.
Highlight Create New Initiator and press Enter.
268
Advertisement
Table of Contents
