Vessraid Is Beeping - Promise Technology 1000f series Product Manual

Fc, iscsi, sas external disk array subsystems

Hide thumbs Also See for 1000f series:

Table of Contents

VessRAID 1000f, 1000i, 1000s Series Product Manual

VessRAID is Beeping

VessRAID's alarm has five different patterns, as shown below.

Figure 1. Audible alarm sound patters

When you first power-up the VessRAID, it beeps twice to show normal operation.

See pattern 1, in Figure 1.

The audible alarm sounds at other times to inform you that the VessRAID needs

attention. But the alarm does not specify the condition.

When the alarm sounds:

Check the front and back of VessRAID for red or amber LEDs, as described

If email notification is enabled, check for new messages.

Check for yellow !s red Xs

Check the event log. See page 63 or page 266.

When a continuous tone sounds, there are multiple alarm patterns sounding at

the same time.

To make alarm settings or cancel an alarm, see "Making Buzzer Settings" on

page 143 or page 290.

in Tree View, see page 375.

1000i series 1000s series