Synchronizing The Subsystem Ntp Manually - Promise Technology 1000f series Product Manual

VessRAID 1000f, 1000i, 1000s Product Manual
• Highlight Week and press the spacebar to toggle through First, Second,
Third, Forth, and Last.
• Highlight Day and press the spacebar to toggle though the days of the
week.
9. Press Ctrl-A to save your settings.
10. Press Y to confirm.

Synchronizing the Subsystem NTP Manually

The NTP service must be enabled before you can manually synchronize the
subsystem. See "Setting Subsystem NTP" on page 215.
To synchronize the VessRAID subsystem with an NTP Server:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight NTP Management and press Enter.
3. Highlight Start Time Sync and press Enter.
4. Press Y to confirm.
216