There are four major parts to the graphic user interface:
•
Header (see below)
•
Tree (see page 61)
•
Management View (see page 63)
•
Event Frame (see page 63)
Using the Header
The Header contains the following items:
•
Language – To change languages, see "Choosing a Language" on page 59.
•
View – To view the Event Frame, see "Viewing the Event Frame" on
page 63.
•
Storage Network – To view all of the VessRAID subsystem enclosures
currently accessible the network, see "Working with the Storage Network" on
page 65.
•
Contact Us – Click Contact Us for a list of contact information, including
Technical Support. Also see "Contacting Technical Support" on page 411.
•
Logout – To log out of WebPAM PROe, see page 64.
•
Help – Click Help in the Header to access the main online help menu.
•
About – Click About in the Header to display the WebPAM PROe software
version and build date.
Using Tree View
Tree View enables you to navigate around all components of the Subsystem,
including iSCSI management, network and service management, RAID
controller, enclosure, physical drives, disk arrays, logical drives, and spare
drives. The figure below shows the components of Tree View.
Chapter 4: Management with WebPAM PROe
61