Viewing File System Status; Rebuilding A Nas File System - Promise Technology 1000f series Product Manual

VessRAID 1000f, 1000i, 1000s Product Manual
4. Click the Sharing Setup
5. Click the UNIX/Linux Sharing tab.
6. From the Volume dropdown menu, choose the volume containing the folder
you want to modify.
7. From the Folder Name dropdown menu, choose the folder you want to
modify.
8. In the New IP Address field, type the IP address of the UNIX or Linux PC
from which you will access this folder.
9. Click the Add button.

Viewing File System Status

The NAS file system contains your share folders. The NAS file system name is
the Mount Point you specified when you created the logical drive.
To view file system status:
1. Click the Subsystem
2. Click the Administrative Tools
3. Click the NAS
4. Click the File System Management

Rebuilding a NAS File System

Typically the first indication of a problem with the NAS file system is when your
network drive becomes unavailable. Rebuilding the file system does NOT cause
data loss.
To check and rebuild a file system:
1. Click the Subsystem
2. Click the Administrative Tools
3. Click the NAS
4. Click the File System Management
5. Check the Volume's RAID status.
If the Volume icon has a yellow ! and the RAID Status is Critical, the file
system contains errors and you must rebuild it.
6. Click the Check File System button.
7. Click the OK button to confirm.
The file system takes a few moments to rebuild. You cannot access the file
system while the rebuild is in progress.
icon.
icon in Tree View.
icon.
icon.
icon in Tree View.
icon.
icon.
110
icon.
icon.