Viewing Sas Port Statistics; Viewing Sas Initiators; Adding A Sas Initiator - Promise Technology 1000f series Product Manual
Fc, iscsi, sas external disk array subsystems
Hide thumbs
Also See for 1000f series:
- Product manual (28 pages) ,
- Product manual (438 pages) ,
- Quick start manual (472 pages)
Table of Contents
Advertisement
Viewing SAS Port Statistics
There are two SAS data ports on the controller. To view information about the
SAS ports:
1.
From the Main Menu, highlight SAS Management and press Enter.
2.
Highlight SAS Ports and press Enter.
3.
Highlight the port you want to see and press Enter.
4.
Highlight SAS Port Statistics and press Enter.
The statistics for the selected port appear on the screen.
Viewing SAS Initiators
There are two SAS data ports on the controller. To a view a list of initiators
currently logged either of the SAS ports:
1.
From the Main Menu, highlight SAS Management and press Enter.
2.
Highlight SAS Initiators and press Enter.
A list of all currently logged-in initiators appears on the screen.
Adding a SAS Initiator
You must add an initiator to the VessRAID's initiator list in order to use the
initiator to create a LUN for your logical drive.
To add an initiator:
1.
From the Main Menu, highlight SAS Management and press Enter.
2.
Highlight SAS Initiators and press Enter.
3.
Highlight the initiator you want to add and press the spacebar to choose it.
4.
Highlight Add Marked Initiators and press Enter.
The initiator is added to VessRAID's initiator list.
Chapter 6: Management with the CLU
263
Advertisement
Table of Contents
