Managing Software Services; Making Email Settings - Promise Technology 1000f series Product Manual

Managing Software Services

Software Services include the following functions:
• Making Email Settings (page 119)
• Making SLP Settings (page 120)
• Making Web Server Settings (page 121)
• Making Telnet Settings (page 122)
• Making SNMP Settings (page 123)
• Making Netsend Settings (page 124)

Making Email Settings

The Email sends notification messages to users. See Setting-up User Event
Subscriptions (page 79).
To make Email service settings:
1. Click the Subsystem
2. Click the Administrative Tools
3. Click the Email Setting link in Management View.
4. Enter the IP address for your SMTP server.
5. Enter server port number for your SMTP server.
25 is the default.
6. Choose Yes to enable SMTP authentication or No to disable.
7. If you chose Yes for SMTP authentication, enter a Username and Password
in the fields provided.
8. Enter an Email sender address (example: RAIDmaster@mycompany.com).
9. Enter an Email subject (example: VessRAID Status).
10. Click the Submit button.
Sending a Test Message
To send one test message to the User currently logged into WebPAM PROe:
1. Under Test Email, check the "Send A Test Email" box.
2. Click the Submit button.
If you do not receive the Test Email message, see your Network Administrator for
assistance with the mail server setup, email accounts, and other issues.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
119