Powering Off The Vessraid - Serial Connection - Promise Technology 1000f series Product Manual
Fc, iscsi, sas external disk array subsystems
Hide thumbs
Also See for 1000f series:
- Product manual (28 pages) ,
- Product manual (438 pages) ,
- Quick start manual (472 pages)
Table of Contents
Advertisement
VessRAID 1000f, 1000i, 1000s Product Manual
3.
Highlight Option and press the spacebar to display Shutdown.
4.
Highlight Submit and press Enter.
A warning message appears.
5.
Press Y to continue.
6.
When you see the following message:
Shutdown complete. It is now safe to power off the subsystem.
Manually turn off the power supply switch (both switches with redundant
power supplies) on the back of the subsystem.
Powering Off the VessRAID – Serial Connection
This option enables you to start the VessRAID NAS from SmartNAVI.
The Wake on LAN option must be enabled. See "Making Management Port
Settings" on page 248.
To power off the VessRAID:
1.
From the Main Menu, highlight Additional Info and Management and press
Enter.
2.
Highlight Shutdown or Restart and press Enter.
3.
Highlight Option and press the spacebar to display Poweroff.
4.
Highlight Submit and press Enter.
A warning message appears.
5.
Press Y to continue.
When you see the following message:
Shutdown complete. It is now safe to power off the subsystem.
The subsystem is ready to power on. See "Powering On a NAS Device" on
page 187.
After you shut down the subsystem, wait at least 10 seconds
before you power on the subsystem again.
After you power off the subsystem, wait at least 10 seconds before
you power on the subsystem again.
Caution
Caution
286
Advertisement
Table of Contents
