Making Logical Drive Lun Settings - Promise Technology 1000f series Product Manual

VessRAID 1000f, 1000i, 1000s Product Manual
If there are entries, they are listed as follows:
• Entry Number – A number assigned to each block of entry.
• Table Type – Read Check, Write Check or Inconsistent Block (see
below).
• Start Logical Block Address – LBA of the first block for this entry.
• Count – Number of continuous blocks starting from this LBA.
Table Definitions
• Read Check Table – Contains a list of read errors for this logical drive.
• Write Check Table – Contains a list of write errors for this logical drive.
• Inconsistent Block Table – Contains a list of inconsistent blocks for
this logical drive. Mirror data for RAID Levels 1, 1E, and 10 or Parity
data for RAID Levels 5, 6, 50, and 60 identified by the Redundancy
Check (a background function).

Making Logical Drive LUN Settings

LUN Masking is the process of applying a LUN Map so that each initiator can
only access the LUNs specified for it.
Before you can specify an initiator for your LUN map, you must add the initiator to
the VessRAID 's initiator list. See "Adding an Initiator" on page 116.
You must enable LUN Masking in order apply a LUN map. See "Enabling LUN
Masking" on page 117.
To specify a LUN Map:
1. Click the Subsystem
2. Click the Disk Arrays
3. Click the Disk Array
4. Click the Logical Drives
5. Click the Logical Drive
6. Click the LUN Map tab in Management View.
7. From the Unassigned Initiator List, click an initiator to choose it.
Or type the initiator name into the Initiator Name field.
8. Type a LUN into the Map to LUN field.
9. Click the Assign button.
The initiator appears in the Assigned Initiator List.
icon in Tree View.
icon.
icon.
icon
icon.
172