Making Automatic Ip Settings - Promise Technology 1000f series Product Manual

VessRAID 1000f, 1000i, 1000s Product Manual
7. Make the needed changes the same as in step 5.
After you have set the last (extreme right) digit, press the
The display says Save Network Setting?
8. Press the
The display shows the new IP address you set.

Making Automatic IP Settings

To make Management Port settings automatically:
1. Press the
2. Press the
If it says Link Status Down, reconnect to the network before preceding.
3. Press the
4. Press the
5. Press the
6. Press the
The display shows the new IP address set by the DHCP server.
This completes the Management Port setup.
You can also make network settings for the iSCSI ports with the LCD screen,
however that task is easier using CLU or WebPAM PROe.
button to confirm.
or button until the display says Management Port.
button and the display says Link Status Up.
or button and the display says DHCP Disable.
button to make a change.
button to Enable.
button to confirm.
48
button.