Deleting A Logical Drive - Promise Technology 1000f series Product Manual

11. Press the
12. Press the
The display shows the default sector size.
The choices are 512 B; 1 KB, 2 KB, and 4 KB
13. Press the
The display shows the default read policy.
The choices are ReadCache, ReadAhead and None.
14. Press the
15. Press the
The display shows the default write policy.
The choices are WriteBack and WriteThru (write though).
16. Press the
17. Press the
18. Press the
The display shows the logical drive creation process. When the creation is
finished, the LCD returns to Logical Disk Create.

Deleting a Logical Drive

To delete a logical drive from a disk array:
1. Press the
2. Press the
3. Press the
4. Press the
5. Press the
6. Press the
7. Press the
8. Press the
9. Press the
button.
or button until the display shows the stripe size you want.
button to choose the stripe size shown on the screen.
or button until the display shows the sector size you want.
or button until the display shows the read policy you want.
button to choose the read policy shown on the screen.
or button until the display shows the write policy you want.
button to choose the write policy shown on the screen.
button again to confirm.
When you delete a logical drive, you delete all the data it contains.
Back up all important data before deleting a logical drive.
or button until the display says Array Configure.
button and the display says Auto Configure.
or button until the display says Advanced Configure.
or button until the display says Logical Drive Delete.
button again to display a list of logical drives.
or button choose a logical drive for deletion.
button and the display says Delete Logical Drive X?
button again and the display says Are you sure? NO.
button to change the answer to YES, then press the
Caution
307
Managing Disk Arrays