Deleting A Spare Drive; Locating A Spare Drive - Promise Technology 1000f series Product Manual
Fc, iscsi, sas external disk array subsystems
Hide thumbs
Also See for 1000f series:
- Product manual (28 pages) ,
- Product manual (438 pages) ,
- Quick start manual (472 pages)
Table of Contents
Advertisement
2.
Press the
3.
Press the
4.
Press the
5.
Press the
6.
Press the
choose a physical drive for your spare drive.
To create a dedicated or revertible spare drive, see "Creating a Spare Drive"
on page 176 (WebPAM PROe) or page 241 (CLU).
Deleting a Spare Drive
To delete a spare drive:
1.
Press the
2.
Press the
3.
Press the
4.
Press the
5.
Press the
6.
Press the
7.
Press the
8.
Press the
button.
9.
Press the
The chosen spare drive is deleted.
Locating a Spare Drive
This feature helps you identify the physical drive assigned as a spare drive.
To locate a spare drive:
1.
Press the
2.
Press the
3.
Press the
button and the display says Auto Configure.
or
button until the display says Advanced Configure.
or
button until the display says Spare Drive Create.
button again to display a list of unconfigured physical drives.
or
button to move through the list. Press the
If the spare drive you delete is the only spare, the controller will not
rebuild a critical array until you provide a new spare drive.
or
button until the display says Array Configure.
button and the display says Auto Configure.
or
button until the display says Advanced Configure.
or
button until the display says Spare Drive Delete.
button again to display a list of spare drives.
or
button to choose the spare drive to delete.
button and the display says Are you sure? NO.
button to change the answer to YES, then press the
button again to confirm.
or
button until the display says Spare Drive Management.
button and the display a list of spare drives by ID number.
or
button to scroll through the list of spare drives:
Caution
311
Managing Spare Drives
button to
Advertisement
Table of Contents
