VessRAID 1000f, 1000i, 1000s Product Manual
Figure 4. RAID controller cover and attaching screw
4.
Remove the four attaching screws. See Figure 5.
5.
Detach the fan's power connector and lift the old fan out of the controller.
Figure 5. RAID Controller cooling fan
Power
connectors
6.
Place a new fan in the controller, attach the power connector, and install the
four attaching screws.
7.
Attach the RAID controller cover and install the two attaching screws.
See Figure 4.
Cover
Attaching screw
(one each side)
322
Attaching
screws (4)