Restarting The Subsystem; Monitoring The Restart - Promise Technology 1000f series Product Manual

VessRAID 1000f, 1000i, 1000s Product Manual

Restarting the Subsystem

You can only do part of this function in WebPAM PROe. Additional action is
required, as described below. To restart the subsystem
1. Click the Subsystem
2. Click the Administrative Tools
3. Click the Shutdown link in Management View.
A Shutdown or Restart tab will appear.
4. On the Shutdown or Restart tab, choose Restart from the dropdown menu.
5. Click the Submit button.
6. In the warning box, click the OK button.
7. In the confirmation box, type the word confirm in the field provided.
8. Click the OK button.
When the controller shuts down, your WebPAM PROe connection will be
lost.
9. Wait for two to three minutes.
10. In your browser, log into WebPAM PROe once again.
If you cannot log in, wait for 30 seconds, and try again. Repeat until login is
successful.

Monitoring the Restart

To monitor a restart, you must use the Command Line Interface (CLI) though a
serial connection to the VessRAID.
When the Login: prompt appears, the restart is finished.
If you have a JBOD expansion, you are not required to restart the
JBOD expansion units when you restart the RAID subsystem.
icon in Tree View.
Note
icon.
134