The logical connections for these arrangements are shown the Enclosure
Topology tab. The physical connections for these arrangements are discussed in
"Chapter 2: VessRAID Installation" on page 11.
Viewing Enclosure Information
To view enclosure information:
1.
Click the Subsystem
2.
Click the Enclosures
3.
Click the Enclosure
Enclosure information appears the Information tab in Management View. You
can monitor power supplies, fans, enclosure temperatures and voltages, and
the battery.
Adjustable items
You can set or adjust the following items:
•
Enclosure Warning and Critical temperature thresholds
•
Controller Warning and Critical temperature thresholds
See "Making Enclosure Settings" on page 141.
For information on Enclosure problems, see "Chapter 10: Troubleshooting" on
page 365.
Making Enclosure Settings
To make Enclosure settings:
1.
Click the Subsystem
2.
Click the Enclosures
3.
Click the Enclosure
4.
Click the Settings tab in Management View.
5.
Enter a value in the following fields as necessary:
•
Enclosure Warning Temperature Threshold
•
Enclosure Critical Temperature Threshold
•
Controller Warning Temperature Threshold
•
Controller Critical Temperature Threshold
6.
Click the Submit button.
The changes take effect immediately.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
icon.
icon in Tree View.
icon.
icon.
141