Appendix A: Setting-Up Nas Network Drives; Setting-Up A Network Drive - Windows - Promise Technology 1000f series Product Manual
Fc, iscsi, sas external disk array subsystems
Hide thumbs
Also See for 1000f series:
- Product manual (28 pages) ,
- Product manual (438 pages) ,
- Quick start manual (472 pages)
Table of Contents
Advertisement
Appendix A: Setting-up NAS Network Drives
This appendix covers the following topics:
•
Setting-up a Network Drive – Windows (page 419)
•
Setting-up a Network Drive – UNIX and Linux (page 424)
Network Attached Storage (NAS) is supported by VessRAID iSCSI subsystems
only. See "iSCSI Storage Area Network (SAN)" on page 27 and "Chapter 5:
SmartNAVI" on page 181.
Setting-up a Network Drive – Windows
Before you can set-up a network drive, you must have:
•
NAS file system. See "Creating a NAS File System" on page 111.
•
Windows protocol enabled. See "Making Windows Protocol Settings" on
page 104.
•
Windows sharing enabled. See "Making Windows and FTP Sharing
Settings" on page 109.
To setup a network drive:
1.
On the Windows desktop, double-click the My Network Places icon.
2.
Click the Search button in the toolbar.
If the Search button is not shown, from the View menu, choose Toolbars,
then Standard Buttons.
3.
In the Computer name field, type the IP address of the VessRAID's iSCSI
port and click the Search button.
An icon representing the iSCSI port appears.
419
Advertisement
Table of Contents
