Lcd Panel; Installing Smartnavi - Promise Technology 1000f series Product Manual

LCD Panel

The LCD panel activates approximately 35 seconds after you switch on the
VessRAID's power supply.
At first, the LCD screen displays
When the VessRAID is fully booted and running under normal conditions, the
LCD screen shows the VessRAID model number and IP address, as shown in
Figure 27.
Figure 27.VessRAID optional LCD display
A list of LCD panel functions and instructions for using them is included in the
VessRAID Product Manual on the CD.
This completes the power and start-up.
For setup instructions, see "Chapter 3: VessRAID Setup" on page 41.

Installing SmartNAVI

SmartNAVI software enables you to manage your VessRAID subsystem when it
is configured as Network Attached Storage (NAS). The NAS option requires:
• An iSCSI SAN data connection, see page 27.
• Logical drives configured for NAS, see page 53.
To install SmartNAVI:
1. Open the software CD, find the SmartNAVI install icon (right),
and drag it to your PC's desktop.
2. Double-click the SmartNAVI Install icon to begin installation.
3. In the Welcome screen, click the Next button.
4. In the License screen, choose the I accept the terms... option and click the
Next button.
5. In the Choose Destination folder, click the Browse... button if you do not
agree with the proposed destination folder.
When you have chosen the destination folder, click the Next button.
System is Initializing
39
Chapter 2: VessRAID Installation
.