VessRAID 1000f, 1000i, 1000s Series Product Manual
Changing NAS Device Settings
You make initial network settings when you set up the VessRAID subsystem. This
feature makes network settings on a VessRAID NAS system currently running on
the network.
To make network settings:
1.
Click the Setup Wizard icon at the top of the screen.
2.
Click the Network Setting icon at the bottom of the screen.
3.
Choose a setting method
•
Automatic – Enables your DHCP server to make the settings
•
Manual – You input all of the network settings yourself.
4.
Optional. Type a new name in the Computer Name field.
The computer name is the name of your VessRAID subsystem as it appears
in the Device List.
5.
If you chose the Manual option, make changes as required to
•
IP address (of the VessRAID)
•
Subnet Mask
•
Gateway IP address
•
Primary DNS IP address
•
Secondary DNS IP address
6.
Click the OK button.
7.
In the confirmation box, click the Yes button.
SmartNAVI returns to the opening screen.
You must log into the VessRAID system again.
Deleting a NAS Device
When NAS device displays a grayed out icon and its IP address says Unknown,
you have the option of deleting that NAS device from the Device List.
The action of deleting a NAS device only affects the SmartNAVI Device List. It
has no effect on the actual NAS device.
See your network administrator for help in making these settings.
Important
188