VessRAID 1000f, 1000i, 1000s Product Manual
Managing Fibre Channel Connections
This feature pertains to VessRAID Fibre Channel models. Functions include:
•
Viewing Fibre Channel Node Information (page 86)
•
Viewing Fibre Channel Port Settings (page 86)
•
Making Fibre Channel Port Settings (page 87)
•
Viewing Fibre Channel Port Statistics (page 88)
•
Viewing SFP Information (page 89)
•
Viewing Fibre Channel Logged-in Devices (page 90)
•
Viewing Fibre Channel Initiators (page 90)
Viewing Fibre Channel Node Information
To view Fibre Channel node information:
1.
Click the Subsystem
2.
Click the Administrative Tools
3.
Click the Fibre Channel Management
4.
Click the Node tab in Management View.
The current node (data port) settings the Controller are shown, including:
•
WWNN – World Wide Node Name
•
Supported Features – Class of service
•
Maximum Frame Size – 2048 bits
•
Supported Speeds – 8 Gb/s, 4 Gb/s, or 2 Gb/s
Viewing Fibre Channel Port Settings
To view the current Fibre Channel port settings:
1.
Click the Subsystem
2.
Click the Administrative Tools
3.
Click the Fibre Channel Management
4.
Click the Port tab in Management View
The current data port settings the Controller are shown, including:
•
State – Online, Offline, Unknown
•
Port Identifier – A hexadecimal name for this port
•
Topology Attached – See the table on page 88
•
WWNN – World Wide Node Name
•
WWPN – World Wide Port Name
icon in Tree View.
icon.
icon.
icon in Tree View.
icon.
icon.
86