Promise Technology 1000f series Product Manual page 411

Reported Event
Rebuild is resumed
Rebuild is stopped
Rebuild stopped internally The logical drive is offline. See page 394.
Rebuild is aborted due to
an internal error.
Rebuild is queued
Rebuild marks logical
drive synchronized upon
rebuild completion
Redundancy Check
Redundancy Check is
started
Redundancy Check is
completed
Redundancy Check is
paused
Redundancy Check is
resumed
Redundancy Check is
stopped
Redundancy Check is
aborted due to internal
error
Redundancy Check
encountered inconsistent
block(s)
Redundancy Check task
is queued
Redundancy Check task
is stopped internally
Rebuild has resumed again after a pause.
Rebuild stopped because of user intervention,
schedule or the logical drive was deleted or the target
disk drive encountered an error.
If rebuild stopped by the user, restart the rebuild. See
page 163 (WebPAM PROe) or page 236 (CLU).
System resources are low. Reduce system load or
restart the VessRAID. See page 134 (WebPAM
PROe) or page 288 (CLU).
Rebuild has been set manually or by schedule.
Result of successful rebuild. Normal.
Redundancy Check has started manually or by
schedule.
Redundancy Check has finished.
Redundancy Check paused because of user
intervention, schedule or a higher priority background
activity.
Redundancy Check has resumed again after a
pause.
Redundancy Check stopped because of user
intervention, schedule or the logical drive was deleted
or went critical or offline. See page 394.
System resources are low. Reduce system load or
restart the VessRAID. See page 134 (WebPAM
PROe) or page 288 (CLU).
Check the logical drive's inconsistent block table. See
page 171. Rebuild the disk array if necessary. See
page 153 (WebPAM PROe) or page 230 (CLU).
Redundancy Check has been set manually or by
schedule.
The logical drive is offline. See page 394.
391
Chapter 10: Troubleshooting
Corrective Action