•
Transport Ready – This function is not supported in the LCD panel. See
"Preparing a Disk Array for Transport" on page 166 (WebPAM PROe) or
page 236 (CLU).
Locating a a Logical Drive
This function requires the LCD to be in Advanced mode. See page 292. This
feature helps you identify the physical drives assigned to the logical drive.
To locate a logical drive:
1.
Press the
2.
Press the
3.
Press the
4.
Press the
5.
Press the
6.
Press the
logical drive blink for one minute. See Figure 4.
Figure 4. Disk Status LED
or
button until the display says Logical Disk Management.
button to display a list of logical drives by ID number.
or
button to scroll through the list of logical drives.
button choose a logical drive.
or
button until the display says Locate Logical Drive.
button. The disk status LEDs for the physical drives in the
Plus carrier
Original carrier
309
Managing Disk Arrays
Disk Status
Disk Status