Managing Iscsi Connections; Viewing Iscsi Node Information; Making Iscsi Node Settings - Promise Technology 1000f series Product Manual
Fc, iscsi, sas external disk array subsystems
Hide thumbs
Also See for 1000f series:
- Product manual (28 pages) ,
- Product manual (438 pages) ,
- Quick start manual (472 pages)
Table of Contents
Advertisement
Managing iSCSI Connections
iSCSI connections deal with the VessRAID's four host data ports.
•
Viewing iSCSI Node Information (below)
•
Making iSCSI Node Settings (below)
•
Viewing iSCSI Target Ports (page 256)
•
Viewing iSCSI Target Port Statistics (page 257)
•
Viewing the iSCSI Portal (page 257)
•
Viewing iSCSI Sessions (page 258)
•
Working with iSCSI iSNS (page 258)
•
Working with iSCSI CHAPs (page 259)
•
Using iSCSI Ping (page 261)
A detailed explanation of iSCSI functions, how and when they are used, and their
relationship to one another is beyond the scope of this document. For more
information, contact the Internet Engineering Task Force at
Viewing iSCSI Node Information
There are four iSCSI data ports on the controller. To view information about the
iSCSI ports:
1.
From the Main Menu, highlight iSCSI Management and press Enter.
2.
Highlight iSCSI Node and press Enter.
The node information appears on the screen.
Making iSCSI Node Settings
The iSCSI Node has four ports. Node settings affect all four ports.
See "Making Data and Management Connections" on page 20 for information
about how these ports are physically connected to the Host PC.
To make settings to the iSCSI node:
1.
From the Main Menu, highlight iSCSI Management and press Enter.
2.
Highlight iSCSI Node and press Enter.
3.
Highlight iSCSI Node Settings and press Enter.
Chapter 6: Management with the CLU
255
http://www.ietf.org/
Advertisement
Table of Contents
