Managing Enclosures
On VessRAID, enclosures include the main VessRAID subsystem or Head Unit
as well as VessJBOD units that are connected through expansion. Enclosure
Management includes the following functions:
•
Viewing the Enclosure Information (page 139)
•
Locating an Enclosure (page 139)
•
Viewing Enclosure Topology (page 140)
•
Viewing Enclosure Information (page 141)
•
Making Enclosure Settings (page 141)
•
Viewing FRU VPD Information (page 142)
•
Checking the Battery (page 142)
•
Reconditioning a Battery (page 143)
•
Making Buzzer Settings (page 143)
Viewing the Enclosure Information
The enclosure information shown varies among different hardware versions.
To view information about the enclosures:
1.
Click the Subsystem
2.
Click the Enclosures
The following information is shown:
•
Enclosure ID number
•
Enclosure Type
•
Operational Status
•
Status Description (specific components in need of attention, if any)
Locating an Enclosure
To locate an enclosure (subsystem):
1.
Click the Subsystem
2.
Click the Enclosures
3.
Click the Locate Enclosure button.
The disk status LEDs and the LEDs on the back of the enclosure blink for
one minute. See the Figures below.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
icon in Tree View.
icon.
139