Trans Belt Hp Fail Clear; Dev Unit Reset; Fuser Temp Fail Clear; Atc Sensor Failure Clear - Lexmark X945e MFP 7510 series Service Manual

Trans Belt HP Fail Clear

To perform the Trans Belt Fail Clear Test:
1. Touch Trans Belt Fail Clear from the Diagnostics Menu.
2. Touch Trans Belt HP Fail Clear.
Trans Belt HP Fail Clear Testing.... appears on the LCD.
Press Stop to return to Trans Blet PH Fail Clear.

Dev Unit Reset

To perform the Dev Unit Reset Test:
1. Touch Dev Unit Reset from the Diagnostics Menu.
The following tests appear on the LCD:
Touch the following:
Y Channel
M Channel
M Channel
K Channel
When each test completes, the LCD returns to Dev Unit Reset.

Fuser Temp Fail Clear

To perform the Fuser Temp Fail Clear Test:
1. Touch Fuser Temp Fail Clear from the Diagnostics Menu.
2. Touch Fuser Temp Fail Clear.
Fuser Temp Fail Clear Testing.... appears on the LCD.
When testing is complete, the LCD returns to Fuser Temp Fail Clear.

ATC SENSOR FAILURE CLEAR

To perform the ATC Sensor Failure Clear Test:
1. Touch ATC SENSOR FAILURE CLEAR from the Diagnostics Menu.
The following tests appear on the LCD:
Touch the following:
Y Channel (925.00)
M Channel (925.01)
M Channel (925.02)
K Channel (925.02)
When each test completes, the LCD returns to ATC SENSOR FAILURE CLEAR.
Appears on the LCD:
Y Channel Testing...
M Channel Testing...
C Channel Testing...
K Channel Testing...
Appears on the LCD:
Y Channel Testing...
M Channel Testing...
C Channel Testing...
K Channel Testing...
7510
Previous
Go Back
3-25
Diagnostic aids
Next