2000-Sheet Dual Input (Ttm)-Sensor (Tray 2 Feed-Out) Removal; 2000-Sheet Dual Input (Ttm)-Media Feed Lift Motor Removal - Lexmark X945e MFP 7510 series Service Manual

2000-sheet dual input (TTM)—sensor (tray 2 feed-out) removal
1. Open the TTM left door assembly.
2. Remove the two screws securing bracket (A) to the machine.
3. Remove the bracket (A).
4. Disconnect the connector from the sensor (tray 2 feed-out) (B).
5. Release the hooks securing the sensor (tray 2 feed-out) (B) to the bracket (A).
6. Remove the sensor (tray 2 feed-out) (B).
2000-sheet dual input (TTM)—media feed lift motor removal
1. Remove the tray module left cover. See
on page 4-174.
2. Remove the TTM media tray 3 assembly. See
assembly removal" on page
3. Remove the TTM media tray 4 assembly. See
assembly removal" on page
4. Remove the tray 4 media transport assembly. See
transport assembly removal" on page
5. Remove the media feed unit assembly. See
removal" on page 4-190
on page 4-186.
6. Disconnect the harness from the media feed lift motor (A).
7. Remove the two screws securing the media feed lift motor to the media feed unit assembly (B).
"2000-sheet dual input (TTM)— tray module left cover removal"
"2000-sheet dual input (TTM)—TTM media tray 3
4-178.
"2000-sheet dual input (TTM)—TTM media tray 4
4-177.
"2000-sheet dual input (TTM)—TTM tray 4 media
4-182.
"2000-sheet dual input (TTM)—media feed unit assembly 2
or "2000-sheet dual input (TTM)—media feed unit assembly removal (tray 4)"
7510
4-193
Repair information
Previous
Next
Go Back