Adf Controller Card Assembly Removal - Lexmark X945e MFP 7510 series Service Manual

ADF controller card assembly removal

1. Remove the ADF rear cover. See
2. Disconnect all connectors from the ADF controller card assembly (A).
3. Remove the five screws securing the ADF controller card assembly (A).
4. Remove the ADF controller card assembly (A).
Replacement note: Ensure that all connections are properly reconnected.
Replacement note: Ensure that the ground wire is reconnected.
"ADF rear cover removal" on page
P786
P756
P755
P757
P758
P759
P760
P754
P753
P785
P752
P761
P751
4-138.
Ground wire
Rear
A
7510
4-145
Repair information
Previous
Next
Go Back