2000-Sheet Dual Input (Ttm)-Tray 3 Rear Cable Assembly Removal - Lexmark X945e MFP 7510 series Service Manual

2000-sheet dual input (TTM)—tray 3 rear cable assembly removal
1. Remove the tray module left cover. See
on page 4-174.
2. Remove the TTM media tray 3 assembly. See
assembly removal" on page
3. Remove the tray 3 front cover. See
page 4-178.
4. Remove the E-clip with a prying tool securing the front lift cable pulley (A) to the tray lift shaft assembly (B).
5. Gently move the tray lift shaft assembly (B) toward the rear of the tray, and detach the rear bushing (C) from
the frame.
Note: Do not remove the front lift cable pulley (A), or the front lift cables will become detached.
6. Move the rear portion of the tray lift shaft assembly (B) away from the frame.
"2000-sheet dual input (TTM)— tray module left cover removal"
"2000-sheet dual input (TTM)—TTM media tray 3
4-178.
"2000-sheet dual input (TTM)—tray 3 front cover removal" on
7510
4-179
Repair information
Previous
Next
Go Back